Suzhou Lizhu Machinery Co.,Ltd
Model No.: LZ-V900D
Type: Preform Injection
Plastic Type: Thermoplastic
Plasticizing Way: Screw Type
Clamping Way: Hydraulic
Clamping Force: 90Tons
Injection Volume: 200grams
Packaging: Wooden box
Productivity: 100 sets/per year
Place of Origin: China
Supply Ability: 100 sets/per year
1, injection device and clamping device in the same vertical center line, and the mold is up and down direction to open and close. Its area is only about half of the horizontal machine, therefore, converted into an area of about twice the productivity of about.
2, easy to achieve insert molding. Because the mold surface is facing up, placement of the insert is easy. It is easy to realize fully automatic insert molding by adopting the combination of the lower mold plate fixed, the upper mold movable type, the pulling belt conveying device and the manipulator.
3, the weight of the mold from the level of support for the upper and lower template opening and closing movements, similar to the horizontal machine does not occur due to the gravity of the mold before the inverted, making the template can not open and close the phenomenon. Is conducive to lasting to maintain the accuracy of machinery and molds. 4, through a simple robot can remove all the plastic parts cavity, is conducive to precision molding.
5, the general clamping device is open around the open, easy to configure various types of automation devices, adapted to complex, sophisticated products, automatic molding.
6, pull the belt conveyor equipment is easy to achieve the middle of a series of molds installed, easy to achieve automatic production molding.
7, easy to ensure mold resin flow and mold temperature distribution of consistency.
8, equipped with a rotating table, mobile table and tilt table and other forms, easy to achieve insert molding, mold combination molding.
9, small batch trial production, the mold structure is simple and low cost, and easy to uninstall.
10, withstood the test of many earthquakes, vertical machine due to low center of gravity, the relative horizontal machine better shock resistance.
Before-sale service First, we will know the structure of the model you purchased will produce products and performance characteristics, professional recommendations to you what you need the most suitable models. Second, you will learn about the company's general information, if you have special requirements of products, will recommend the professional configuration. We will also understand similar type for you to provide professional references. If you need our products, we will give you the best of our knowledge of the information, so that you can buy what you need.
The sale of service We will provide you the whole contract to protect our lawful right. We will help you set up the machine which you bought from us until it can run well. We will help you to training your technicist which accord to your requirement until completely know how to use it, repair it and dispose the technic problems. We salesman and staff will call you after you buy it, which you evaluate performance and we need improve
We will give you the products of one year service. We will set up some maintenance departments all of the world, If there are some problems about the machine, you can call us in time. When we accept the customer`s phone or fax, If you need parts or visiting service, In province we can arrived in 24 hours to help you solve the issue and put back on production. If you buy our products from our agency. We will ask them for provide you service, all of our staff will be training when they work. We promise you will be satisfied with us and we can provide you a long-time service.